MaxxECU GEN2 TRACK Standalone ECU with LSU 5.2 Flying Lead Install Kit
- السعر العادي
- Dhs. 8,200.00 AED
- سعر البيع
- Dhs. 8,200.00 AED
- السعر العادي
-
The MaxxECU GEN2 TRACK is a standalone engine management system for street, track and drag builds. This kit (MaxxECU part number 2536) supplies the GEN2 TRACK unit with flying lead harnesses and a single Bosch LSU 5.2 wideband lambda sensor, ready to be wired into a custom installation.
GEN2 TRACK runs engines from 1 to 12 cylinders, up to 8 fully sequential and 12 in wasted spark. It has a built-in 4.5 bar MAP sensor, dual knock inputs, an ARM dual-core processor and 8GB of onboard logging at 1000Hz. Tuning is done through the MTune software or wirelessly over Wi-Fi/Bluetooth with the MDash app.
Key Functions
- Launch control, anti-lag and traction control
- Flex fuel and boost control
- Nitrous control
- Variable valve timing (VVT) control
- CAN gearbox control for DSG/DCT and ZF 8HP transmissions
- Dual CAN bus for dashes, keypads and other CAN devices
Specifications
Brand: MaxxECU
Model: GEN2 TRACK
Part number: 2536
Cylinders: 1–12 (8 sequential, 12 wasted spark)
MAP sensor: Built-in, 4.5 bar (65 psi)
Wideband: 1× Bosch LSU 5.2 included
Logging: 8GB at 1000Hz
Connectivity: USB-C, Wi-Fi, Bluetooth, dual CAN
Operating voltage: 6–22V
Case: Black powder-coated aluminium
What's Included
- 1× MaxxECU GEN2 TRACK unit
- 1× MaxxECU GEN2 TRACK box and foam insert
- 1× GEN2 cable harness 1
- 1× GEN2 TRACK / RACE cable harness 2
- 1× GEN2 TRACK (REV2) cable harness 3
- 1× Bosch LSU 5.2 wideband lambda sensor (0258 037 010)
- 1× LSU 4.9/5.2 6-way connector housing
- 1× MAP sensor nipple, BSP 1/8 to AN3
- 1× MAP sensor nipple, BSP 1/8 to hose
- 1× USB-C to USB-A cable and 1× USB-C to USB-C cable
- 2× USB-C rubber covers
- 1× Bluetooth/Wi-Fi antenna
- 1× Printed quick guide and wiring diagram
- 2× MaxxECU stickers
For wiring, installation and tuning, contact our technical team on WhatsApp at +971 50 920 9292.
تعذر تحميل معلومات توفر الاستلام


