MaxxECU GEN2 TRACK Standalone ECU with Dual LSU 5.2 Flying Lead Install Kit
- السعر العادي
- Dhs. 8,200.00 AED
- سعر البيع
- Dhs. 8,200.00 AED
- السعر العادي
-
The MaxxECU GEN2 TRACK is a standalone engine management system for street, track and drag builds. This kit (MaxxECU part number 2537) supplies the GEN2 TRACK unit with flying lead harnesses and two Bosch LSU 5.2 wideband lambda sensors, for engines that need a wideband reading on each bank.
GEN2 TRACK runs engines from 1 to 12 cylinders, up to 8 fully sequential and 12 in wasted spark. It has a built-in 4.5 bar MAP sensor, dual knock inputs, an ARM dual-core processor and 8GB of onboard logging at 1000Hz. Tuning is done through the MTune software or wirelessly over Wi-Fi/Bluetooth with the MDash app.
Key Functions
- Launch control, anti-lag and traction control
- Flex fuel and boost control
- Nitrous control
- Variable valve timing (VVT) control
- CAN gearbox control for DSG/DCT and ZF 8HP transmissions
- Dual CAN bus for dashes, keypads and other CAN devices
Specifications
Brand: MaxxECU
Model: GEN2 TRACK
Part number: 2537
Cylinders: 1–12 (8 sequential, 12 wasted spark)
MAP sensor: Built-in, 4.5 bar (65 psi)
Wideband: 2× Bosch LSU 5.2 included
Logging: 8GB at 1000Hz
Connectivity: USB-C, Wi-Fi, Bluetooth, dual CAN
Operating voltage: 6–22V
Case: Black powder-coated aluminium
What's Included
- 1× MaxxECU GEN2 TRACK unit
- 1× MaxxECU GEN2 TRACK box and foam insert
- 1× GEN2 cable harness 1
- 1× GEN2 TRACK / RACE cable harness 2
- 1× GEN2 TRACK (REV2) cable harness 3
- 2× Bosch LSU 5.2 wideband lambda sensors (0258 037 010)
- 2× LSU 4.9/5.2 6-way connector housings
- 1× MAP sensor nipple, BSP 1/8 to AN3
- 1× MAP sensor nipple, BSP 1/8 to hose
- 1× USB-C to USB-A cable and 1× USB-C to USB-C cable
- 2× USB-C rubber covers
- 1× Bluetooth/Wi-Fi antenna
- 1× Printed quick guide and wiring diagram
- 2× MaxxECU stickers
For wiring, installation and tuning, contact our technical team on WhatsApp at +971 50 920 9292.
تعذر تحميل معلومات توفر الاستلام


