PROMETH PM190 WATER METHANOL INJECTION PUMP (50 GPH/3150CC PER MINUTE @ 150 PSI)

Highest Output Pump In The Industry

Our PM190 pump is the the highest flowing/output water methanol injection pump in the industry. It's well suited for 900-1400 horsepower applications.

Features Include:

• Pressure adjustable from 100-300 PSI
• 3/8 NPT female inlet & outlet port
• Motor turns 2200 RPM @ 12 volts  
• 16 amp draw
• Built-in bypass valve
• Built-in thermal protection
• Built-in anti reverse check valve 
  
• Heavy duty dual EPDM pump seals   
• Pressure adjustable from 100-300 PSI
• Can run dry up to 1 hour without damage
• 100% methanol compatible
• Tested prior to shipping 
• Made in the USA
• Weight 6.2 lbs

Flow & Horsepower Ratings @ 13.5 Volts:

• 1.5 gallons per minute open flow
• Use 12 gauge wire for power and ground
• 190 liters per hour open flow 
• 50 gallons per hour @ 150 PSI
• 3150 cc per minute @ 150 PSI
• Good for 800-1200 horsepower

Special Notes:

• Do not use with petroleum products (E85, E98, gasoline, diesel, etc) 
• Does not include pump fittings. Pump fittings are available for sale separately
• Pumps come preset at 200 PSI 
• Expect 4-5 years of service if pump pressure is left at 200 PSI or below
• Running the pump over 250 PSI is not advised and will shorten pumps life
• All tests were performed using a 6AN stainless steel braided hose on the inlet side of pump
• Using 1/4" outside diameter nylon on the inlet side of the pump will reduce pump performance and flow output
• Pump may be mounted vertical or horizontal 
• Pump is not submersible